How to use
Anchoring-Grout
1. Prepare the surface and bolt pockets.
Remove rust, oil, grease and dust
1. Prepare the surface and bolt pockets.
Remove rust, oil, grease and dust
2. Provide shuttering.
Install a leak-proof, rigid formwork with air vents
2. Provide shuttering.
Install a leak-proof, rigid formwork with air vents
3. Apply bonding agent.
Use HW Bonding Agent Epoxy (HW403), SBR (HW404) as required
3. Apply bonding agent.
Use HW Bonding Agent Epoxy (HW403), SBR (HW404) as required
4. Add 12-14% water
For 25kg bag, use 3-3.5 L of water.
4. Add 12-14% water
For 25kg bag, use 3-3.5 L of water.
5. Mix using a low-speed blender
5. Mix using a low-speed blender
6. Pour the entire mix at one go. Cure with water for 7 days.
Pour from one side to avoid air entrapment
6. Pour the entire mix at one go. Cure with water for 7 days.
Pour from one side to avoid air entrapment
1. Prepare the surface and bolt pockets.
Remove rust, oil, grease and dust
2. Provide shuttering.
Install a leak-proof, rigid formwork with air vents
3. Apply bonding agent.
Use HW Bonding Agent Epoxy (HW403), SBR (HW404) as required
4. Add 12-14% water
For 25kg bag, use 3-3.5 L of water.
5. Mix using a low-speed blender
5. Mix using a low-speed blender
6. Pour the entire mix at one go. Cure with water for 7 days.
Pour from one side to avoid air entrapment
13 L
per 25 kg
YIELD (Without Aggregate)
15 L
per 25 kg
YIELD (With 30% Aggregate)