How to use
Bonding-Agent-Epoxy
1. Prepare the surface
Remove loose material and dust.
1. Prepare the surface
Remove loose material and dust.
2. Clean with steel wire brush.
Ensure full exposure of base surface.
2. Clean with steel wire brush.
Ensure full exposure of base surface.
3. Mix both components for 2-3 Minutes
Mix Ratio - 3(Resin):1(Hardener). Use a low-speed blender for uniform consistency.
3. Mix both components for 2-3 Minutes
Mix Ratio - 3(Resin):1(Hardener). Use a low-speed blender for uniform consistency.
4. Apply over the substrate.
Thin even layer with brush or roller
4. Apply over the substrate.
Thin even layer with brush or roller
5. Pour concrete / grout within 30 minutes.
Overlay must be done while tacky.
5. Pour concrete / grout within 30 minutes.
Overlay must be done while tacky.
1. Prepare the surface
Remove loose material and dust.
2. Clean with steel wire brush.
Ensure full exposure of base surface.
3. Mix both components for 2-3 Minutes
Mix Ratio - 3(Resin):1(Hardener). Use a low-speed blender for uniform consistency.
4. Apply over the substrate.
Thin even layer with brush or roller
5. Pour concrete / grout within 30 minutes.
Overlay must be done while tacky.
5. Pour concrete / grout within 30 minutes.
Overlay must be done while tacky.
45 - 60
mins
POT LIFE
20 - 25
mins
TACKINESS TIME
15 - 20
sq. ft. / L
COVERAGE
At 1 mm Thickness