How to use
Tile-Fix
1. Prepare and pre-wet wall / floor
1. Prepare and pre-wet wall / floor
2. Add Tile Fix to Water
25 to 30% water by weight.
2. Add Tile Fix to Water
25 to 30% water by weight.
3. Mix to a thick paste using a blender
Use a slow speed blender for lump-free consistency
3. Mix to a thick paste using a blender
Use a slow speed blender for lump-free consistency
4. Apply with a notch trowel
Application thickness: T1: 3 mm – 6 mm, T2: 3 mm – 6 mm, T3: 6 mm – 12 mm, Max T4: 6 mm – 12 mm, Max-White T4: 6 mm – 12 mm
4. Apply with a notch trowel
Application thickness: T1: 3 mm – 6 mm, T2: 3 mm – 6 mm, T3: 6 mm – 12 mm, Max T4: 6 mm – 12 mm, Max-White T4: 6 mm – 12 mm
5. Apply on the back of the tile
Full coverage for hold.
5. Apply on the back of the tile
Full coverage for hold.
6. Fix tile
Press and position within 20 minutes (Open time), adjust using rubber mallet
6. Fix tile
Press and position within 20 minutes (Open time), adjust using rubber mallet
1. Prepare and pre-wet wall / floor
2. Add Tile Fix to Water
25 to 30% water by weight.
3. Mix to a thick paste using a blender
Use a slow speed blender for lump-free consistency
4. Apply with a notch trowel
Application thickness: T1: 3 mm – 6 mm, T2: 3 mm – 6 mm, T3: 6 mm – 12 mm, Max T4: 6 mm – 12 mm, Max-White T4: 6 mm – 12 mm
5. Apply on the back of the tile
Full coverage for hold.
5. Apply on the back of the tile
Full coverage for hold.
6. Fix tile
Press and position within 20 minutes (Open time), adjust using rubber mallet
60
mins
POT LIFE
30
mins
ADJUSTABILITY TIME
60 - 80
sq.ft. / 20 kg
COVERAGE
