How to use
Tile-Grout
1. Clean the tile joints with an air blower
1. Clean the tile joints with an air blower
2. Add 35-40% water
350 – 400 ml of water per kg of HW210.
2. Add 35-40% water
350 – 400 ml of water per kg of HW210.
3. Mix well
Mix to a homogeneous smooth mass
3. Mix well
Mix to a homogeneous smooth mass
4. Apply with a putty blade
Remove excess grout immediately.
4. Apply with a putty blade
Remove excess grout immediately.
5. Clean the tiles with a sponge after 30 mins.
5. Clean the tiles with a sponge after 30 mins.
1. Clean the tile joints with an air blower
2. Add 35-40% water
350 – 400 ml of water per kg of HW210.
3. Mix well
Mix to a homogeneous smooth mass
4. Apply with a putty blade
Remove excess grout immediately.
5. Clean the tiles with a sponge after 30 mins.
5. Clean the tiles with a sponge after 30 mins.
60
mins
POT LIFE
30
RMT per kg
COVERAGE
3 X 3 mm Tile Joints